Digital BW, The Print

I just tried both profilmaker 5.03 followed by
profilemaker 4.15. You cannot use the spot measure
function in 5.03 without the dongle. However you can
use it in 4.15 (Both from the menu and clicking on the
spot function icon. 

However, I am a bit of a novice when it comes to
interpreting the lab data. Is there a simple
conversion from lab values to density?

Help would be appreciated

woody spedden

--- Roy Harrington <roy@...> wrote:


---------------------------------
--- In DigitalBlackandWhiteThePrint@yahoogroups.com,
"Bob Frost" <bob@f...> 
wrote:
> Even with MeasureTool 4.15, they were grayed out on
the icons, but you could 
> stil use them if you used the Menu.
> 
> Bob Frost.
> 
> ----- Original Message ----- 
> From: "edrudolpho" <erudolph@p...>
> > >
> > > Ed
> >
> > Probably because too many people were using it in
demo mode without
> > purchasing the software, so GMB started limiting
the features in Demo
> > mode. But this is just a guess.
> 
> That's my guess too.  But someone (was it Roy)
reported that it was working, 
> which is why
> I posted this.


I'm using MT version 5.0.3 and it's working fine.

One thing you have to do that I think was changed is
that after
you Configure and select the device you have to close
the configure
dialog window before the others become available. 
Also if you use
both spot and the scanning mode you have to close one
before starting
the other.  4.1.5 didn't force you to do this but I
found the two modes
could interfere with each other.

Roy





Please visit the Group Homepage to check the Files,
and other resources as they are often being updated.

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily
digest, or you wish to unsubscribe, please edit your
Membership preferences by visiting this same page.

Please follow these basic guidelines:
- As threads develop, trim off excess portions of
earlier messages to keep them short.
- Good manners are required at all time. No personal
attacks or flames. Hostile, aggressive or
argumentative users may be removed from the membership
without notice.
- Keep your posts and threads related to the group
topic of digital B&W printing. Users who persistently
make off-topic posts may be removed from the
membership.
- By posting on this forum you agree to abide by the
group rules and guidelines, and to abide by the
actions and decisions of the group Owner and
Moderators. See \ufffdGroup Topic, Rules and Guidelines\ufffd in
the Files section:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/

BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE
DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY
UNDERSTAND AND AGREE THAT THE \ufffdOWNER\ufffd AND \ufffdMODERATORS\ufffd
OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE
LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING
BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN
IF THE  \ufffdOWNER\ufffd AND \ufffdMODERATORS\ufffd OF DIGITAL BW, THE
PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE
INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO
GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF
YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR
CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE
PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING
TO THE DIGITAL BW, THE PRINT YAHOO GROUP.


    
    
---------------------------------
  YAHOO! GROUPS LINKS

  
    Visit your group "DigitalBlackandWhiteThePrint" on
the web.
   
    To unsubscribe from this group, send an email to:

DigitalBlackandWhiteThePrint-unsubscribe@yahoogroups.com
   
    Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.

  
---------------------------------