Digital BW, The Print

You're right, Steve.  I wasn't getting the OK, because the software really wasn't sensing the 
presence of the device.

When opening the Configuring menu in 4.1.5, with the menu set to Eye-one, Reflective, 
the software found the device immediately.  In 5.0.3, the same set up did not work; I had 
to switch from Reflective to Emissive and back again, to get the software to see the Eye-
One.  All's well... :-)

Ed

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale <stevekale@b...> 
wrote:
> Make sure you have an OK in the Configure menu....
> 
> 
> > From: edrudolpho <erudolph@p...>
> > Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > Date: Sun, 10 Jul 2005 19:19:38 -0000
> > To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > Subject: [Digital BW] Re: MeasureTool 5:  Spot Measurement not working?
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Roy Harrington"
> > <roy@h...> 
> > wrote:
> > snip
> >>> I don't know, Roy.  I've got 5.0.3 and 4.1.5.  Using 5.0.3., the only tools
> >>> available 
> >> here are 
> >>> Configuring and Generate.  I'm okay with 4.1.5, though because I haven't
> >>> upgraded 
> >> to 
> >>> Tiger.  
> >>> 
> >>> Ed
> >> 
> >> Well I am on Tiger but I can't see why that would make a difference.
> >> The only thing I can think of is you MUST close the Configure window for
> >> the other options to be available.
> >> 
> >> But 4.1.5 is fine though, until you try Tiger.
> >> 
> >> Roy
> > 
> > FWIW, I'm closing the Configuring window but still am limited to only the two
> > functions.  
> > But, as you say, there's a workaround for the moment.  ...Ed
> >