Digital BW, The Print

I am about the leave but here's a sample.  The only important lines
are the data lines - they start with a digit.  Then column 3 is the
Gray  value and column 7 is the Lab_L readings.  Any number of steps
are allowed in any order.  Any white space separates the columns.

My plan is to allow density at some point too.  Toolcrib looks like the
more obvious output format for the x-rite devices.

Roy


LGOROWLENGTH	1
CREATED	"7/21/2003"  # Time: 12:57
INSTRUMENTATION	"eye-one"
MEASUREMENT_SOURCE	""Illumination=D50	ObserverAngle=2°
	WhiteBase=Absolute	Filter=No""
KEYWORD	"SampleID"
KEYWORD	"SAMPLE_NAME"
NUMBER_OF_FIELDS	9
BEGIN_DATA_FORMAT
SampleID	SAMPLE_NAME	GRAY	XYZ_X	XYZ_Y	XYZ_Z
	LAB_L	LAB_A	LAB_B
END_DATA_FORMAT
NUMBER_OF_SETS	21
BEGIN_DATA
1	A1	0.00	90.30	93.00	83.24	97.23	1.14	-5.38
2	B1	5.00	81.48	83.75	73.66	93.34	1.40	-4.07
3	C1	10.00	72.64	74.52	64.14	89.17	1.65
	-2.59
4	D1	15.00	64.02	65.53	55.03	84.76	1.91
	-1.04
5	E1	20.00	56.26	57.46	47.10	80.44	2.12
	0.36
6	F1	25.00	50.08	51.05	41.01	76.71	2.31
	1.41
7	G1	30.00	43.86	44.60	34.99	72.63	2.50
	2.54
8	H1	35.00	37.74	38.29	29.29	68.23	2.67
	3.60
9	I1	40.00	32.45	32.85	24.73	64.04	2.77
	4.16
10	J1	45.00	27.61	27.90	20.62	59.80	2.84
	4.69
11	K1	50.00	23.84	24.05	17.57	56.14	2.87
	4.93
12	L1	55.00	20.16	20.31	14.71	52.18	2.85
	4.97
13	M1	60.00	16.91	17.04	12.35	48.31	2.71
	4.68
14	N1	65.00	13.62	13.72	9.98	43.83	2.50	4.24
15	O1	70.00	11.01	11.10	8.10	39.74	2.31	3.86
16	P1	75.00	8.96	9.04	6.59	36.05	2.14	3.59
17	Q1	80.00	7.10	7.16	5.22	32.16	1.96	3.32
18	R1	85.00	5.56	5.61	4.11	28.40	1.75	2.97
19	S1	90.00	4.32	4.36	3.18	24.83	1.64	2.85
20	T1	95.00	2.92	2.95	2.21	19.86	1.24	2.02
21	U1	100.00	2.04	2.08	1.56	15.89	0.92	1.70
END_DATA

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Johnny Eades" 
<jeades1@s...> wrote:
> Steve,
> 
> Could you send me the same file you're sending to Tom. I also use an 
> x-rite 810
> 
> Your friend in Photography,
> 
> Johnny
>