Digital BW, The Print

It prints, but it’s all wrong.  The image appears to have different scales
and shifts.
I’ll call Steve, but it looks like the driver is not finished.  I tried all
the resolutions.

I believe I have a good grasp on what to do, in part due to figuring out how
to make curves in QTR.  I could see how someone who never set ink limits and
calibrated a printer would be lost with this software.

John

-----Original Message-----
From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com]On Behalf Of
dfaprinting
Sent: Wednesday, July 20, 2005 11:11 AM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: Re: [Digital BW] Evolution RIP

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "John Moody"
<moodymz3@y...> wrote:
> Update
> I just got off the phone with Steve at Digifab; very helpful.
> It seems there are no users with 2200 printers.  The driver is not
complete
> for 1440 x 2880.  Selecting a different resolution mode, 720x720
works just
> fine.
> Now I can't get into the various linearizations of the RIP
>
> John


As in it won't print a linearization chart, or you can't
measure/enter the values?

The cold hard ugly truth is they need a good manual for this
software. It can be very difficult to fumble around trying to get
this working.




[Non-text portions of this message have been removed]