Digital BW, The Print

You need to reset the chip.  I believe this can only be done by taking the
carts out.  At this point there is a real risk that air gets into the area
around the poppet valve which must then be removed with the bottom fill
adaptor.


> From: Igor Wesdorp <iwesdorp@...>
> Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Date: Wed, 20 Jul 2005 15:59:19 -0000
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Subject: [Digital BW] Re: Refilling MIS Spongeless
> 
> Yes, but is it not so that by taking them out, you create new air
> pockets in the ink outlets (I suppose this is were these air pockets
> arise). Thus, is it not better to leave the carts in the printer while
> filling, and monitoring the ink level by looking from above?
> 
> And do you, as with pre-filled carts, use the "out-of-ink-light" as an
> indication that you have to do a refill?
> 
> Btw, Thank you, Steven.
> 
> I g o r
>