Here are some general targets when simple dilutions are used (which is no longer the case most of the time). I found the MIS LK to be about 30% MIS PK. I do not dilute PK to make light inks because measuring errors are too likely. Lighter inks are better to start from for consistency with small volumes or less than very good scales. I often have used MIS UT-C as a starting point, and LK is used a lot. UT-FS-M is about 18% UT-C. UT-FS-Y is about 8.3% UT-C. Before the latest UT-FSN was mixed with the new blue, the old UT-FSN used the same hue for all the inks (not true with the latest version). M was 20% C, and Y was 10% C. Note that the different pigments required different dilutions to make the same densities. Paul www.PaulRoark.com > -----Original Message----- > From: DigitalBlackandWhiteThePrint@yahoogroups.com > [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of > rbehr2001 > Sent: Wednesday, July 20, 2005 6:26 PM > To: DigitalBlackandWhiteThePrint@yahoogroups.com > Subject: Re: [Digital BW] Roark's Lab - Mixing Your Own > > You are right, the instructions do not specifically say Photo Black. > The site says "Do not use Eboni as the Black Ink for blending. > Original Archival Black, 7600 Light Black, or 7600 Photo Black are > the acceptable black inks for blending." But I can't believe the > differece between Photo black and 7600 Photo Black would change the > mix from 60% to 5% Grayscale. There's something else I'm missing or > the information is just wrong. > > Bob > > > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Nick H. Nugent" > <nghin@p...> wrote: > > Elsewhere in the MIS website it is stated that the black ink should > > not be photo black, but some sort of much thicker black ink. The > > formula is based upon the usage of this black ink. > > > > --nick > > > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "rbehr2001" > > <rsbehr@h...> wrote: > > > <paul.roark@v...> wrote: > > > > Note that while the graph shape is about right, the mixing > > > instructions MIS has put on their "Roark's Lab" page are not from > me. > > > > > > > Are you saying that a 2% solution of Photo Black should give 60% > black? > > > Because my results were not even close. > > > > > > Thanks, > > > > > > Bob > > > > > Please visit the Group Homepage to check the Files, and other resources as > they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to > unsubscribe, please edit your Membership preferences by visiting this same > page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages to keep > them short. > - Good manners are required at all time. No personal attacks or flames. > Hostile, aggressive or argumentative users may be removed from the > membership without notice. > - Keep your posts and threads related to the group topic of digital B&W > printing. Users who persistently make off-topic posts may be removed from > the membership. > - By posting on this forum you agree to abide by the group rules and > guidelines, and to abide by the actions and decisions of the group Owner > and Moderators. See "Group Topic, Rules and Guidelines" in the Files > section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT > YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND > "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO > YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR > EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF > PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE > "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN > ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE > OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) > UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) > STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT > YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE > PRINT YAHOO GROUP. > > Yahoo! Groups Links > > > > >
Message
RE: [Digital BW] Roark's Lab - Mixing Your Own
2005-07-21 by Paul Roark
Attachments
- No local attachments were found for this message.