Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "chiron1961" <NTJSLC@a...> 
wrote:
> Thanks Paul,
> 
> I have downloaded QTR.  I've just started to read through the literature.  Page and Print 
> Setup look familiar (looks similar to the Gimp driver).  There are controls for ink density, 
> good.  There is an option for Glossy Photo Paper, good.  I can select 2880 dpi 
> resolution---these are all things I lost with the standard Epson printer driver.  However, 
> there is not an option for "no color management".  Many on this forum are using this 
RIP.  
> Is there a way to discard "color management" and retain the other controls provided by 
> QTR?
> 
> I have received alot of information from various forums.  Its looking like I may have to 
do 
> what Joe said: mix in a little black with my green to get the density I need for Azo ---or 
> live with variables of "color management".  The black seems to hold to the OHP 
substrate, 
> judging from the vairous palettes I have printed (which all have dense black borders and 
> backgrounds).
> 
> Thanks again for the assistance,
> 
> Nathan Jones

QTR doesn't have any color management built into it, (nor does the gimp driver).
All the color management (if any is being used) would be done in Photoshop.

QTR uses the low level part of gimp-print but the controls are vastly different.  You
can control the 7600 inks pretty much how ever you want.  You can probably use or
at least start with the standard UltraChrome profiles.

Roy