Digital BW, The Print

Alex,

Chances are you have those curves if you got them from Paul. The last 
set we did were the 9th generation. Contact me off list and I will 
send those curves to you if you need them. I know Paul was working on 
the 1270 curves, but I don't know how far they have progressed. One 
other thing I forgot to mention, but that you are probably aware of, 
the 2000P curves were written for a PC, not a Mac - the curves are OS 
dependent.

Terry

--- In DigitalBlackandWhiteThePrint@y..., "a_pettit_jr" 
<a_pettit_jr@y...> wrote:
> Hello Terry,
> I am at the point of buying an E1270. 
> If you have some good correction curves, I will reinstall 
> the MIS inkset and try again. 
> Even when I got a good print (PremLuster, SuperX),
> the tonal scale was quite poor with much posterization.
> I am sure I tried that step : I use that for the 12x16
> prints - the bidirectional is fine for 8x10.
> 
> Thanks,
> Alex P
> 
> --- In DigitalBlackandWhiteThePrint@y..., "terryr1028" 
> <terryr1028@h...> wrote:
> > Alex,
> > 
> > Sorry to hear about the problems with the MIS VM. The settings 
> below 
> > were the ones that we used to develop the curves for the 2000P:
> > 
> > Media Type:              Archival Matte Paper
> >  
> > Print Quality:           Photo
> >  
> > High Speed:              Unchecked
> >  
> > Flip Horizontal:         Unchecked
> >  
> > Color Management:        Color Controls with Mode set to Vivid and
> >                          all sliders left at zero
> > 
> > My guess would be that if you didn't uncheck the high speed box, 
> that 
> > is why you saw banding.
> > 
> > Terry
> > 
> >