Digital BW, The Print

Oddly, the 2400 can't handle the high loads of the older MIS PK inks.  I ran
into that issue with the R200/220 also.  So, for that system I found the
best dmax was with a PK that had a modified load and also was neutralized,
but not to the extent of the original PKN.  At any rate, the R2 PK I
recommended to MIS, and I assume they are selling, is a PKN with a modified
load.  I have not tried it in a 2400, but it might be close to optimal for
that printer also.  I think the R2 carts are the same as the 2400, so a
pre-filled R2 PKn with a 2400 chip on it would test the idea.

Paul
www.PaulRoark.com 


> -----Original Message-----
> From: DigitalBlackandWhiteThePrint@yahoogroups.com
> [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of John
> Moody
> Sent: Monday, November 28, 2005 2:01 PM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: RE: [Digital BW] MIS k4 black density
> 
> I'm not entirely surprised at the Dmax Carl reported.  When I asked MIS
> directly if the K4 photo black achieved the same Dmax as OEM K3, the reply
> was "K4 is more stable".  That sounded like a no, to me.
> 
> Best regards,
> John Moody
> 
> -----Original Message-----
> From: DigitalBlackandWhiteThePrint@yahoogroups.com
> [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com]On Behalf Of Greg
> Sent: Monday, November 28, 2005 4:49 PM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] MIS k4 black density
> 
> Carl, are you printing in BiD or Uni-direction? If BiD, try using UniD
> to see if the extra dry time between passes will bring your dmax back
> up (or is it down??). Anyway, that might help you get back to a darker
> black.
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> 
> Please visit the Group Homepage to check the Files, and other resources as
> they are often being updated.
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you wish to
> unsubscribe, please edit your Membership preferences by visiting this same
> page.
> 
> Please follow these basic guidelines:
> - As threads develop, trim off excess portions of earlier messages to keep
> them short.
> - Good manners are required at all time. No personal attacks or flames.
> Hostile, aggressive or argumentative users may be removed from the
> membership without notice.
> - Keep your posts and threads related to the group topic of digital B&W
> printing. Users who persistently make off-topic posts may be removed from
> the membership.
> - By posting on this forum you agree to abide by the group rules and
> guidelines, and to abide by the actions and decisions of the group Owner
> and Moderators. See "Group Topic, Rules and Guidelines" in the Files
> section:
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> 
> BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
> YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
> "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO
> YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
> EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF
> PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE
> "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN
> ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE
> OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii)
> UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii)
> STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT
> YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE
> PRINT YAHOO GROUP.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
>