Digital BW, The Print

I am using the UT2 inkset in my R200 with success, but you have to 
apply a transfer curve to adjust the density while in gray gamma 2.2, 
followed by a cyan adjustment curve in RGB 98 to eliminate the cold 
tones in the darker ranges (which I just came up with). The print is 
then made while in RGB 98 mode. Then use the yellow slider to adjust 
for a warmer tone if desired (assuming sepia installed in the Y 
position). The results are turning out really nice for me on Epson 
matte paper and also H. photorag. Anyone interested in these curves 
for this inkset/paper combo, feel free to contact me offlist and I'll 
email the curves. But since Paul has now developed the EZ inks, I 
think that would be the better/easier way to go if you haven't already 
bought the inks. Mark