Digital BW, The Print

Hi Joe;

I believe we have discussed the subject of microbanding re: the 
1280; what has your experience been with the R1800? I'm on my fourth 
one of these, and all of them have had banding in at least three 
channels, right out of the box with Epson inks. Is this curable? 

Steve Karafyllakis

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Joseph Cettina 
<jcettina@l...> wrote:
> Hi
> We are an authorized service center for Epson .I work on allot of 
> 3000's.Nozzle check should be printed on good photo paper. Nozzle 
> pattern should be inspected with a 10x loop.All nozzle lines 
should be 
> evenly spaced all the dots on the line should be same size.There 
are 
> other adjustments that should be printed and adjusted if needed 
these 
> adjustments are in my service program.Make sure the platen roller 
and 
> paper guide are clean a build up of ink on the platen roller can 
cause 
> paper movement problems.
> Joe
> Laguna Service Inc
> 81 Moore Street
> Hackensack,NJ,07601
> 201-342-2200
> http://www.lagunaservice.com
>