Digital BW, The Print

Somewhere on this list you will find instructions for for resetting
the Epson 4000 Maintenance Tank with the control panel.  I believe you
turn off the  printer and then while holding down the left, up, and
down arrows simultaneously, turn the printer back on.  You will be
presented with a different menu in the control panel.  With a little
searching you will find a reset for the MT.

Jim

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Greg"
<dfaprinting@...> wrote:
>
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Danny Twang 
> <dannyt@> wrote:
> >
> > Thanks Greg!
> > 
> > Will the SK168-II Chip Resetter I use for the C86 work? It look 
> like  
> > the same pattern on the chip?
> > I did manage to figure out how to find the setting for roll 
> paper....
> > 
> 
> 
> I think you will need the SK188 tool.
> 
> Here might be the 4000 reset procedure:
> http://www.inkjetart.com/forum/viewtopic.php?t=25&highlight=tank+reset
> Scroll down to the bottom. The reset tool is safer since you can't 
> change the wrong thing and mess up your printer. I suggest having a 
> backup on hand as the chips do sometimes go bad during the reset.
>