Drew, I'd have MIS UT-FSN inks mailed from the US. (See http://www.inksupply.com/utfs1160.cfm) Eboni matte black for the K position is best. (The 3000 is probably not up to glossy paper printing.) I recommend filling from bulk ink bottles -- much cheaper and easy. UK purchasers appear to receive MIS inks without serious problems. You'll want the various accessories for filling the carts also. Paul www.PaulRoark.com > -----Original Message----- > From: DigitalBlackandWhiteThePrint@yahoogroups.com > [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of Andrew > Rodger > Sent: Tuesday, February 21, 2006 2:53 PM > To: DigitalBlackandWhiteThePrint@yahoogroups.com > Subject: Re: [Digital BW] Epson 3000 still viable? > > Paul > > I note what you say about small gamut ( I had my doubts ). Can you > recommend a specific ink type, ideally one I can buy in the UK :0\ > > I agree re misfeeding problems which I gather could be caused by > hardening of the surface of the pick up rollers. > > Drew > > On 21 Feb 2006, at 21:05, Paul Roark wrote: > > > It's a viable quadtone printer. I do not recommend variable tone > > inksets > > and definitely not a small gamut inkset for the 3000. A monotone > > inkset > > will look much better with those relatively large dots. You need good > > partitioning curves. QTR works and I have Epson driver curves for > > the UT-FS > > and UT-FSN inksets. The RGB curves might be able to be put into > > ICCs so > > that you can take advantage of the linearization function and other > > advantages of Roy's "Create ICC" program. > > > > Made In Scotland On A High Mac! > > > > [Non-text portions of this message have been removed] > > > > Please visit the Group Homepage to check the Files, and other resources as > they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to > unsubscribe, please edit your Membership preferences by visiting this same > page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages to keep > them short. > - Good manners are required at all time. No personal attacks or flames. > Hostile, aggressive or argumentative users may be removed from the > membership without notice. > - Keep your posts and threads related to the group topic of digital B&W > printing. Users who persistently make off-topic posts may be removed from > the membership. > - By posting on this forum you agree to abide by the group rules and > guidelines, and to abide by the actions and decisions of the group Owner > and Moderators. See Group Topic, Rules and Guidelines in the Files > section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT > YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE OWNER AND > MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO > YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR > EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF > PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE > OWNER AND MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN > ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE > OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) > UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) > STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT > YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE > PRINT YAHOO GROUP. > > Yahoo! Groups Links > > > >
Message
RE: [Digital BW] Epson 3000 still viable?
2006-02-21 by Paul Roark
Attachments
- No local attachments were found for this message.