Digital BW, The Print

Hi;

I;ve used nothing but Windex for the 3 years I've been messing with 
these machines, it works fine. I agree you should not use the no-drip 
variety. Direct injection is far more effective as a fast solution than 
carts & cleaning cycles. If a straight-through injection doesn't do it, 
try GENTLY pumping fluid in and then sucking it back out, using a fresh 
load each time. Finish by leaving the head full of Windex, so it 
doesn't run dry when you test it.

Best luck,

Steve Karafyllakis


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "cloudswimmer7774" 
<cloudswimmer@...> wrote:
>
> Hello, I see MIS sells Nozzle cleaning fluid.Anyone have any
> experience with it vs. Windex no drip?I'm going to order a direct
> injection kit and some empty spongeless carts to cover my bases to get
> my 1160 (hopefully) working smoothly.Will try direct injection first,
> and then if needed fill the carts with fluid and run cleaning
> cycles.Thanks!
>