Digital BW, The Print

Thanks Lou.
 I don't believe there is a setting in the 2400 driver for a custom
paper width.
 Anyone?
 The only choice I'm aware for width is to choose the 'thick paper'
setting. Hehe...then one get's a warning with every print that one has
chosen 'thick psper', do you want to continue?
Duh......
 Best
 Ginny

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Louis Dina"
<lbdina@...> wrote:
>
> Ginny,
> 
> I have a 4000 (not a 2400) and find Museo II feeds fine from the back 
> slot.  I use a custom paper width setting of 0.7mm in the Epson 
> driver.  Also, Museo II doesn't perform very well using the EEM 
> setting on my 4000.  The Textured Fina Art setting lays down less ink 
> than the EEM setting and gives me much better Dmax and color gamut.
> 
> Hopefully, this is relevant to your 2400.
> 
> Lou
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "ginnylady33" 
> <ginnylady33@> wrote:
> >
> > I just tried Museo II, 250 gsm. for the first time in my relatively
> > new 2400. For the most part, the paper will not feed from the rear 
> feeder.
> > (About 1 out of 6 times the paper will feed into the printer)
> > 
> > I'm wondering what settings those of you who have tried Museo II in 
> a
> > 2400 use? 
> > What paper do you set the media type for in the driver? 
> > Should I be using the 'thick' setting for 250 GSM. paper? 
> > Should I be using the front single-sheet feeder?
> >  
> >  Basically, I'm not sure if there is a problem with my printer, the
> > settings or the paper itself. By the way, for media type I was 
> trying
> > Enhanced Matte and then Heavyweight Matte. (BTW, Enhanced Matte 
> paper
> > itself feeds just perfectly.)
> > 
> >  Thanks
> >  Ginny
> >
>