Digital BW, The Print

Hey Howard, I use that paper and also the William Turner ,which is 310gsm, in the rear 
feader with no problems.




--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "how786" <how786@...> wrote:
>
>  I'm following this thread with great interest. I, too, have 'feed
> issues' with my 2400. It does appear to be very finicky with  thicker
> papers. 
>  I recently tried H. Photo Rag 308. It was really hard to get this
> paper to feed correctly. I ultimately had to use the single sheet
> front feeder. And, even that, was not consistently effective.
>  It is discouraging to have paid so much for a printer that has feed
> issues with thicker papers.
>  Howard
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "ginnylady33"
> <ginnylady33@> wrote:
> >
> > Thanks Lou.
> >  I don't believe there is a setting in the 2400 driver for a custom
> > paper width.
> >  Anyone?
> >  The only choice I'm aware for width is to choose the 'thick paper'
> > setting. Hehe...then one get's a warning with every print that one has
> > chosen 'thick psper', do you want to continue?
> > Duh......
> >  Best
> >  Ginny
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Louis Dina"
> > <lbdina@> wrote:
> > >
> > > Ginny,
> > > 
> > > I have a 4000 (not a 2400) and find Museo II feeds fine from the back 
> > > slot.  I use a custom paper width setting of 0.7mm in the Epson 
> > > driver.  Also, Museo II doesn't perform very well using the EEM 
> > > setting on my 4000.  The Textured Fina Art setting lays down less ink 
> > > than the EEM setting and gives me much better Dmax and color gamut.
> > > 
> > > Hopefully, this is relevant to your 2400.
> > > 
> > > Lou
> > > 
> > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "ginnylady33" 
> > > <ginnylady33@> wrote:
> > > >
> > > > I just tried Museo II, 250 gsm. for the first time in my relatively
> > > > new 2400. For the most part, the paper will not feed from the rear 
> > > feeder.
> > > > (About 1 out of 6 times the paper will feed into the printer)
> > > > 
> > > > I'm wondering what settings those of you who have tried Museo II in 
> > > a
> > > > 2400 use? 
> > > > What paper do you set the media type for in the driver? 
> > > > Should I be using the 'thick' setting for 250 GSM. paper? 
> > > > Should I be using the front single-sheet feeder?
> > > >  
> > > >  Basically, I'm not sure if there is a problem with my printer, the
> > > > settings or the paper itself. By the way, for media type I was 
> > > trying
> > > > Enhanced Matte and then Heavyweight Matte. (BTW, Enhanced Matte 
> > > paper
> > > > itself feeds just perfectly.)
> > > > 
> > > >  Thanks
> > > >  Ginny
> > > >
> > >
> >
>