RPM is much slower than "Best Photo." I don't know if Qimage is another factor. Try the "Best Photo" setting. Paul www.PaulRoark.com > -----Original Message----- > From: DigitalBlackandWhiteThePrint@yahoogroups.com > [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of > mimimike43 > Sent: Wednesday, April 05, 2006 8:28 AM > To: DigitalBlackandWhiteThePrint@yahoogroups.com > Subject: [Digital BW] First B&W MIS print on R220 very slow > > Firstly, I would like to thank Paul for all of his assistance in > getting me to this point. > > Set up of the printer and inks was very simple. The only thing that > would have been helpful was a color key on the MIS ink cartridges to > help you match the respective cartridge to the stall. I only know > what black and yellow look like. > > I used Paul's .icc profile for Epson Premium Glossy paper. Followed > Paul's recommended driver settings and printed with Qimage. > > The final print is georgeous. Very professional looking on the PGPP. > This is my first time using Epson paper, and pigment inks for that > matter. The only thing is, it felt like a year and a day before the > printer finally spat out this baby 4x6. Actually, it had to take all > of 5 minutes to print. Is this extremely slow print time normal? I > used Paul's recommended setting of RPM. > > > > Feedback much appreciated > > Mike > > > > > > Please visit the Group Homepage to check the Files, and other resources as > they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to > unsubscribe, please edit your Membership preferences by visiting this same > page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages to keep > them short. > - Good manners are required at all time. No personal attacks or flames. > Hostile, aggressive or argumentative users may be removed from the > membership without notice. > - Keep your posts and threads related to the group topic of digital B&W > printing. Users who persistently make off-topic posts may be removed from > the membership. > - By posting on this forum you agree to abide by the group rules and > guidelines, and to abide by the actions and decisions of the group Owner > and Moderators. See "Group Topic, Rules and Guidelines" in the Files > section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT > YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND > "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO > YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR > EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF > PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE > "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN > ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE > OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) > UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) > STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT > YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE > PRINT YAHOO GROUP. > > Yahoo! Groups Links > > > >
Message
RE: [Digital BW] First B&W MIS print on R220 very slow
2006-04-05 by Paul Roark
Attachments
- No local attachments were found for this message.