Digital BW, The Print

Yes I use QTR and I like it.

Look at http://www.inksupply.com/ut_3d.cfm and msg# 77267 on this
forum for more info on the UT-3d.
Basically the ability to print on matt/gloss paper with same inks is
very attractive to me.

Walter 

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "mccarvill"
<espresso_forte@...> wrote:
>
> Hi Walter,
> 
> Do you use QTR? And what were your criteria in selecting the UT-3D 
> inks over the UT7? 
> 
> Cheers,
> 
> Mark 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "viafasin7" 
> <viafasin7@> wrote:
> >
> > Rather than the UT7 inks I chose to go with the MIS UT-3D inks for 
> my
> > 7600. Haven't had a chance to install them yet but will find out 
> soon
> > whether it was the right choice. Hopefully we'll get some curves
> > available soon.
> > 
> > Walter
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "mccarvill"
> > <espresso_forte@> wrote:
> > >
> > > Didn't get any replies to my previous post, so here's hoping the 
> second 
> > > time's the charm. Are any QTR users printing with UT7 inks and an 
> Epson 
> > > 7600, and which printing model are you using? 
> > > 
> > > I would have expected to see a "Quad7600-UT7" printing model 
> listed in 
> > > the software (e.g. Quad2200-UT7) but there isn't. I'd like to 
> clarify 
> > > this before I invest in a set of UT7 inks and carts for my 7600.
> > > 
> > > Many thanks
> > >
> >
>