Digital BW, The Print

I wonder if there is a high failure rate in the MIS Y chips. Mine (2400 
also) would not reset either. I swapped the OEM chip onto it, and it 
works fine now... i suppose next time i order from MIS, i will get a 
replacement chip.

-matt

> Hello,
> 
> I¹ve got a problem with my R2400.  I¹m using MIS inks and just needed to do
> a refill (have done a few before, no problems).  The first issue that
> occurred during the refill was that the yellow cartridge (I¹m using MIS
> spongeless) didn¹t reset, each time I tried I got red (only on the yellow,
> the rest went to green).  I filled it up anyways (it was actually the only
> one that wasn¹t empty, so I thought maybe I wasn¹t getting a green because
> of this).  After I closed the cover and all that, I pressed the ink button.
> It just stayed red.  I turned off the printer, and then back on, and it
> returned to the red ink button.  When I open the ink cover, there is a red
> light above the LLK and Y ink cartridges.  The LLK cartridge reset fine, I
> don¹t know why it is lit (unless the problem is unrelated to the cartridge
> reset).
> 
> Any help is really appreciated
> 
> Regards,
> Guhan

X-PMFLAGS: 16384 0 1 INETSIG.PMS                            

--
Matt Haber
dance, portrait and fashion photography
http://www.matthaber.com