Digital BW, The Print

Hi Chris;

There are sveral things that might help:

A) under the Maintenance tab in the driver, there's a button 
labeled 'Printer and option information' check the box for 'thick paper 
and envelopes & see if that helps
B) the most common solution is to put a little pressure on the paper as 
the machine tries to pull it in. Sometimes it helps to have a piece of 
thin cardboard or several sheets of paper in the tray behind the piece 
you're using.
c) Check the soft rubber cam-like gear in the paper take-up slot to 
make sure it is clean, it collects fuzz and dust from this kind of 
paper very quickly. Clean it with a q-tip and alcohol if it looks even 
a little dirty.

d) If all else fails- apply a strip 3/4 inch masking tape across the 
bottom such that a third of it is stuck to the BACK surface of the 
paper, and the remainder is folded over onto itself as evenly as 
possible. Sticking it to the back surface only means that it is easy to 
peel off, and it doesn't damage the printing side. This gives the 
printer something easier to grab onto. Obviously its a pain to do 
repeatedly, and it doesn't always work

Best,

Steven Karafyllakis

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "flyflightdeck" 
<cloudswimmer@...> wrote:
>
> Hi all,
> 
> I bought this R220 a couple weeks ago and I used Hanamule Photorag 308
> with it succesfully for about 6 or 7 sheets.Now when I try and feed
> the paper it just ejects it all the way through without printing.I
> searched here and found one other reference to the same problem, but
> with no real solution.I really like this paper and have used it a long
> time with my 1160.Is there some kind of hack or fix I can try to get
> this paper to work again in my 220?Thanks..............Chris
>