Digital BW, The Print

Walt is correct. An involvement with Lyson is a long lonely
unsatisfying trip to nowhere. There are too many good solutions
available to use now. Lyson is in the past, and a distant one at that.

John



 BW] Lyson Daylight Darkroom-Help!
> >
> >I've been trying to get this to work and haven't gotten any help from
> >Lyson...too busy with a corporate merger to bother with customers,
> >perhaps?  This has been going on for nearly 3 months as I gave up and
> >waited for them to respond for too long, but that guy got fired....
> >
> >Anyone have any experience with it?
> >
> >I'm using an Epson 2000P, two of them in fact as I want to dedicate
> >one to black and white only and improve on BO with Epson inks if
> >possible (right now I doubt it...), and have had the same problem with
> >both.  Both work beautifully with Epson inks...so it's not the
> >printer, heads, or the like.  Also get perfect nozzle checks, target
> >prints, etc.
> >
> >Here's the issue.  I get a strong blue cast when printing.  If I
> >reduce the end point for the blue ink, the color cast is reduced. 
> >Turn it off and I get a very poor warm print, blue is, of course,
> >gone.  Reduce it to a low level, just a bit of blue.
> >
> >When I use the profiles supplied the problem is the same.  When I
> >built my own profile for Museo Silver Rag, same problem, especially in
> >the light shadows.
> >
> >It appears to me that there is a blue ink in the third position in my
> >cartridges where there should be a very lt. grey, which appears to be
> >in the 5th position.  Is this possible?  Studying the graphs of ink
> >outputs in Profile Creator, it appears that the third ink should be
> >putting down a nice lt grey, added to with the second and finished
> >with the pure black.  But there's blue instead.
> >
> >Anyone have any information on this kind of problem?  My guess is
> >defective color cartridges but I don't know.
> >
> >Dave
> >
> >
> >
> >
> >
> >
> >Please visit the Group Homepage to check the Files, and other
resources as they are often being updated.
> >
> >http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> >
> >If you wish to receive no emails or just a daily digest, or you
wish to unsubscribe, please edit your Membership preferences by
visiting this same page.
> >
> >Please follow these basic guidelines:
> >- As threads develop, trim off excess portions of earlier messages
to keep them short.
> >- Good manners are required at all time. No personal attacks or
flames. Hostile, aggressive or argumentative users may be removed from
the membership without notice.
> >- Keep your posts and threads related to the group topic of digital
B&W printing. Users who persistently make off-topic posts may be
removed from the membership.
> >- By posting on this forum you agree to abide by the group rules
and guidelines, and to abide by the actions and decisions of the group
Owner and Moderators. See "Group Topic, Rules and Guidelines" in the
Files section:
> >http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> >
> >BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE
PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER"
AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE
LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO,
DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE
LOSSES (EVEN IF THE  "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT
YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES),
RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW,
THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF
YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD
PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER
MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
> > 
> >Yahoo! Groups Links
> >
> >
> >
> > 
> >
> >
> >
> >
>