Digital BW, The Print

My 1280 -- which is new -- was also leaving tracks on my Museo Silver 
Rag prints, so I removed the "pizza wheels" in just a couple of 
minutes.  It's very simple -- undo two Phillips head screws and remove 
the slotted metal plate over the wheel row and snap out the wheel 
assemblies toward the rear (there are three, if I recall). No washers 
were needed.

There are instructions online:  
http://www.inkjetart.com/pizza_wheel.html .  Do not be intimidated by 
the detailed narrative.  This is a very simple task.

All the best,

Craig Roberts