Digital BW, The Print

Thanks Craig,

Steve
-- In DigitalBlackandWhiteThePrint@yahoogroups.com, Craig Roberts
<crgrbrts@...> wrote:
>
> My 1280 -- which is new -- was also leaving tracks on my Museo Silver 
> Rag prints, so I removed the "pizza wheels" in just a couple of 
> minutes.  It's very simple -- undo two Phillips head screws and remove 
> the slotted metal plate over the wheel row and snap out the wheel 
> assemblies toward the rear (there are three, if I recall). No washers 
> were needed.
> 
> There are instructions online:  
> http://www.inkjetart.com/pizza_wheel.html .  Do not be intimidated by 
> the detailed narrative.  This is a very simple task.
> 
> All the best,
> 
> Craig Roberts
>