Digital BW, The Print

The i1 needs more power than my USB port seemed to deliver; it would not
always work.  After adding a hub with an external power supply to power the
USB bus, it works reliably now.

A second thought is to try using a different high quality USB cable.  Sorry
this is so ambiguous.
A third thought is to plug it into a motherboard USB port on your desktop PC
(if you are currently using a front panel connector that goes though a
likely poor quality cable from the motherboard).

Best regards,
John Moody

-----Original Message-----
From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com]On Behalf Of bwbonkers
Sent: Thursday, October 12, 2006 5:03 PM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: [Digital BW] Eye-One Calibration Error

I know this is a little off topic but I mainly use my Eye-One for
creating BW profiles so I hope no one objects to this post. I keep
getting a calibration error when either trying to use iMatch or Measure
Tool. The expensive doorstop has been checked by UK service department
and sent to Switzerland. No fault found. I mainly use it with my G4
Powerbook running 10.3.9 I have also tried it on my PC under windows
XP. Same problem on both computers. I have a clean installation on
both. Interestingly in Measure Tool using spot measure it works ! It
keeps failing when trying to measure a chart. Ocasionally it works but
not for long. This is driving me nuts. Any ideas.

Peter


[Non-text portions of this message have been removed]