Digital BW, The Print

John,

We had  some discussion about this awhile ago in the following thread  
on the Colorburst support forum:
http://www.colorburstrip.com/forums/showthread.php?t=1057
Bottom line is that you can adjust the light/dark inks partitioning  
in the latest version of the RIP (4.1), but I haven't found any need  
to do so with my profiling.

Carl

On Oct 14, 2006, at 6:27 AM, John Moody wrote:

> Carl,
> Unless I missed something when I ran the colorburst RIP on my 2200,  
> you can'
> t change the M/LM and C/LC partitions.
>
> Best regards,
> John Moody
>
> -----Original Message-----
> From: DigitalBlackandWhiteThePrint@yahoogroups.com
> [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com]On Behalf Of Carl
> Schofield
> Sent: Friday, October 13, 2006 7:21 PM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: Re: [Digital BW] Re: 9600 for B&W & some potential options
>
> I use the Colorburst Xphoto RIP with my 4000 and make my own CMYK
> profiles for the MIS K4 inks. Works well with the 2200 also. If you
> use the Epson UC inks there are canned profiles available that work
> quite well.
> http://www.colorburstrip.com/ <http://www.colorburstrip.com/>
>
> Carl