Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "John Moody"
<moodymz3@...> wrote:
>
> I hope this does not sound to silly, but make absolutely certain the
correct
> ink is in each slot.  Call support to be sure.
> K7 _is_ smooth, so there must be some issue with your setup or workflow.
> 
> If the K7 is setup and working correctly, then what you are
describing is a
> monitor to print matching problem.  You will find lots of
information on how
> to address that in past messages.
> 


Or that the printer is far enough away from the printer that made the
linearization that the prints are coming out with a big flat spot. I
know everyone wants a simple prepackaged solution, but the truth is
that you really need to take the next step and go through
linearization and set up for each printer in use.