Digital BW, The Print

Jerry--

I have also switched to the K4 inks and spongeless carts. My 
experience is that i often need to run several cleaning cycles after 
filling. The LM seems to be the worst culprit (FWIW, it was also LM 
that would never clear in a prior 1280). However, once it has 
"taken," I've not had any clogs to speak of. I suspect that the 30 
minutes or so that it takes to fill and reset the carts may allow some 
ink to dry on the heads (I usually do all at the carts at once), so I 
may experiment by putting an OEM cart in place while i fill the MIS 
carts. 

Hope this helps.

-matt


> Hi,
> 
> I've just started converting my r2400 from Epson OEM inks to MIS K4
> refillable cartridges (spongeless). My first set of carts I bought
> prefilled and have just run out of OEM ink and have begun to switch
> over. I am suddenly having clogs/dropped jets and ink spots on prints
> since I have switched (I've only partially switched at this point).
> anyone else had these problems? I've not had a single problem with
> OEM ink carts....hate to switch back because of the costs but I've
> already wasted a ton of ink just trying to fix the clog..
X-PMFLAGS: 16384 0 1 INETSIG.PMS                            

--
Matt Haber
dance, portrait and fashion photography
http://www.matthaber.com