Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@y..., ternahan 
<ternahan@s...> wrote:
> thanks, I'll give it a try!
> 
> > I'm assuming it was working fine then stopped. Try some of
> > these VooDoo methods:
> > 
> > 1)Your'e on a Mac I seem to remember so first zap the pram
> > three times in a row. If not try:
> > 
> > 2) Pull out the usb cable with the printer on. Then turn off 
printer,
> > wait 30 seconds plug usb cable in then turn printer on.
> > 
> > 3) Turn off printer and  pull usb and restart. After restart plug
> > printer in and turn on power.


Trish,
hope this WooDoo helped finaly, if not...
assuming that the printer shows up in the chooser as an USB 
Port...you may try a general printer reset:

turn printer OFF
hold down   Pause+LF/FF+MicroAdj(down arrow) together
turn printer ON
hold down buttons until all lights flash, than let go buttons.

Good luck.
Hold my fingers crossed.
Bernd