Digital BW, The Print

I find my 2200s very reliable with 300gsm paper (Entrada...letter size
or 13X19, same story), loaded from the back. Using 190gsm (again
Entrada) a little push helps from the top, but otherwise that's
reliable too. 

If you're looking for a bright white alternative to EEM, check Moab
Kayenta..it's as bright or brighter and there's none of that rapid EEM
yellowing, at least in the year or so I've used it. 





--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Clayton Jones"
<cj@...> wrote:
>
> Hello Olaf,
> 
> >...through my 2400...and using two empty fifty sheet boxes on the 
> >output tray to support the exiting paper at just the right height. 
> 
> Are you aware that the paper exit tray extends and raises up to the
> paper level?  Once the front flap is down, push in on it and then
> release the pressure and it comes out and up to the paper level.  Then
> if you pull on the flap it slides out far enough to catch 13x19 paper.
>  Very clever. Some engineer earned his paycheck on that one.
> 
> Regards,
> Clayton
> 
> 
> Info on black and white digital printing at    
> http://www.cjcom.net/digiprnarts.htm
>