Digital BW, The Print

I recently had this problem with a mixture of new spongeless carts 
and the older half-sponge ones.  The spongeless carts weren't 
seating right and the chip on the back wasn't making good contact.  
You might really try to push the back into place and make sure that 
neighboring cartridges aren't pushing each other up and out of 
position.  It took me a few weeks to figure out what was going wrong.

You do have chips on the carts, and the carts are in the right 
positions, right?  If you have a chip resetter you can make sure the 
chips on the cartridge are okay and resetting to green.  Chips do go 
bad.

Good luck- I was impressed enough by this system to get a second 
R220 to use with MIS PRO color ink and will be receiving the ink 
soon.


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "tim4peace2001" 
<images4peace@...> wrote:
>
> Hello. I finally am getting around to setting up my new R220 & MIS 
> inks. I keep getting a message that the printer is not recognizing 
the 
> inks. It will not let me print. Not even a test print. I have 
never 
> used a R220 or MIS inks. What should I do? Thanks.
> 
> Francis
>