Digital BW, The Print

I have several sets of carts that I use on the R220 and R340.  Not one has actually failed.  I do need to reseat the cart ocassionally.  Also, I will gently clean the chip.  I refill and switch these frequently without any real issues.
   
  It would be useful to find out the differences in the various setups that work/don't work.  But, that's difficult.  
   
  Tom Baker

John Bevans <jbevans@...> wrote:
          I recently bought a R220 and ordered an MIS cartridge set in order to
print what I hoped would be quality B&W prints. When I installed the
cartridges the LC cartridge would not work (covered in another post)
since then two more people have posted to this forum with cartriges
from MIS that will not work on these printers. 
Does MIS have quality control problems? If I need to reseat the
cartrige they should include the cartridge setter in the order. This
has discouraged me with the whole project. MIS resonse to my problem
was reseat the cartrige. ( I explained in my problem report that this
had been done ) Is MIS the only supplier available? Maybe they just
want to sell CIS.



         


[Non-text portions of this message have been removed]