Digital BW, The Print

Thank you Paul,

I re-checked my workflow and I found I left alive a "color 
management" setting in Photoshop.
Now the result is good in DMAX (2.20), till too weack in middle 50% = 
0,41, I'll try to refine curve.  

Thanks a lot
Fausto

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" 
<paul.roark@...> wrote:
>
> Be sure the file is RGB and the driver is set to "No Color 
Adjustment."
> Check that there are no embedded profiles.
> 
>  
> 
> Paul
> 
> www.PaulRoark.com <http://www.paulroark.com/>  
> 
>  
> 
>  
> 
>   _____  
> 
> From: DigitalBlackandWhiteThePrint@yahoogroups.com
> [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of 
bigfst
> Sent: Wednesday, January 17, 2007 8:52 AM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] DMAX UTFSN 1270
> 
>  
> 
> Hello,
> I'm using MIS UTFSn inks with a 1270 printer. While printing on a 
matte 
> papers is ok, I cannot reach a decent DMAX with Glossy Premium (Ebo 
> inkset) using the "1270FS-PremSG-Eboni-RGB-PremG" curve: the 
maximum I 
> Dmax reached is 1.24 (x-Rite 800).
> I checked curves, workflow, rgb setings, Photoshop settings, epson 
> driver without success.
> I'm aware the best would be to print with PhotoBlack instead Ebony, 
but 
> I hoped to reach a good dmax without it.
> Any experience with this configuration?
> Thanks 
> Fausto
> 
>  
> 
> 
> 
> [Non-text portions of this message have been removed]
>