Digital BW, The Print

I know that bad carts/chips happen.  Did MIS replace?
   
  TB
  

John Bevans <jbevans@...> wrote:
          --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Tom Baker
<tbaker1328@...> wrote:
>
> I have several sets of carts that I use on the R220 and R340. Not
one has actually failed. I do need to reseat the cart ocassionally. 
Also, I will gently clean the chip. I refill and switch these
frequently without any real issues.
> 
> It would be useful to find out the differences in the various
setups that work/don't work. But, that's difficult. 
> 
> Tom Baker
> 
Tom, my set up was new printer new cartridges. After the LC cartridge
failure. I tried the LC cartridge that came with the printer. It
worked fine. I tried the MIS LC cartridge in a R340 printer. It failed.
I adjusted tabs, I reinserted, I made sure the cardtridge was seated
properly and pushed to the rear. It don't work. The printer says it
cannot recognize the cartridge.



         


[Non-text portions of this message have been removed]