Digital BW, The Print

I've been running my 2200 for about three years.  The only time I've 
shut it down is when the power fails (about four times a year out 
here in the country).  I print about once every two weeks.  If I 
don't print for a week, I generally run a nozzle check.  Never had a 
clog and almost never have to clean the heads.

Fred

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Brian Ellis 
<bellis60@...> wrote:
>
> "Until recently I was turning my 2400 off after each use but got 
tired of 
> the
> cleaning cycles each time I turned it on . . . ."
> 
> Perhaps the 2400 is different than the 2200 but FWIW I turn the 
2200 off 
> except when in use. I was under the impression that leaving it on 
generated 
> some heat that could cause the inks to dry out.  I don't run 
cleaning cycles 
> every time I turn it back on, I just run a cleaning cycle if I have 
a clog 
> but I almost never have clogs, maybe a couple times a year if that. 
However, 
> I'm certainly open to leaving it on if that's a better practice.