Digital BW, The Print

Thanks again, Philip,

I'll take your advice and just cool it for a while and see how that goes.

I don't even know where the landing pad is--- and not sure what
cleaning fluid to use... so guess I don't have to worry about that
right now!

Regards,

Paul

 In DigitalBlackandWhiteThePrint@yahoogroups.com, "Philip Schwartz"
<Philip.Schwartz@...> wrote:
>
> If you are getting perfect nozzle checks and the print head alignment
> patterns are not showing banding, then running more cleaning cycles
> isn't going to help. If you are still not getting perfect nozzle
> checks, then you have some choices:
> - wait it out. Sometimes just waiting a day or two will allow air  
>   bubbles to dissipate and the ink to flow correctly. Seems like 
>   enough time has already passed and your situation has not improved.
> - Some folks recommend putting cleaning fluid on the landing pad and
>   waiting a day or two. My experience is that most blockages are
>   due to air bubbles, and this won't solve that problem, though
>   the wait might help ...
> - take more drastic action and force cleaning fluid through the 
>   print head. I have had good results doing this, but I can't 
>   recommend it to anyone else as it can easily destroy your print 
>   head.
> 
> Re timestamps: I heard that there was a problem on the mail servers
> that caused delays and messages to be delivered late and out of
sequence.