Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Philip Schwartz"
<Philip.Schwartz@...> wrote:
>
> Try doing a head alignment from the maintenance tab in the Epson
> driver. Be sure to use the same paper you will be using for your final
> output. 

Well, Philip, as I said in a previous post, I ran that head alignment
check and last time I posted, the cyan pattern was almost perfect. Ran
a nozzle check again just now to check the nozzles one more time and
now the cyna is perfect. But new problem: nothing shows up in the
black nozzle check, nothing at all. The ink supply tab shows the black
at less than 20% and says to re-order. In my case that would be a
refill. So I got my MIS refill materials out ready to go, but when I
initiated the procedure for refill (following the manual) the
cartridge carrier did not stop so that the black cartridge was under
the refill position.. in fact it only moved about half an inch to the
left and stopped. Now what... should I take the cartridge out and
refill it anyway? The manual says once the refill procedure is started
not to go back. But I _had_ to go back, closed the printer cover.

Thanks for any suggestions,

Paul