Digital BW, The Print

Carl,

I have been able to clean the rollers on my 2200 over the years a 
number of times by feeding a piece of matt paper with one end dampened 
with windex with ammonia or isopropyl alcohol and feed it through the 
printer a number of times alternating sides up.  This usually lasts for 
a number of boxes of paper and requires repeating from time to time.

HTH

Paul

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Carl Schofield 
<list@...> wrote:
>
> I've been using quite a lot of Hahnemuhle PR and White velvet  
> recently and I've run into problems getting the  2400 to feed these  
> papers.  Two things that might be involved are the bone dry cold air  
> here and accumulation of paper coating on the printer rollers.  I 
was  
> using the sheet feeder, but that is now impossible and I have to use  
> front loading instead.  Any suggestions for cleaning the rollers in 
a  
> 2400?
>