Digital BW, The Print

Thanks for the tip Paul.  I'll give it a try with the 2400.

Carl

On Feb 9, 2007, at 4:17 PM, bwinkjet wrote:

> Carl,
>
> I have been able to clean the rollers on my 2200 over the years a
> number of times by feeding a piece of matt paper with one end dampened
> with windex with ammonia or isopropyl alcohol and feed it through the
> printer a number of times alternating sides up.  This usually lasts  
> for
> a number of boxes of paper and requires repeating from time to time.
>
> HTH
>
> Paul
>
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Carl Schofield
> <list@...> wrote:
>>
>> I've been using quite a lot of Hahnemuhle PR and White velvet
>> recently and I've run into problems getting the  2400 to feed these
>> papers.  Two things that might be involved are the bone dry cold air
>> here and accumulation of paper coating on the printer rollers.  I
> was
>> using the sheet feeder, but that is now impossible and I have to use
>> front loading instead.  Any suggestions for cleaning the rollers in
> a
>> 2400?
\