Digital BW, The Print

Glad to see you've worked on Vista a bit.  I don't have a Vista machine now
and wondering if I really need to buy a new PC to run it.  I would think if
it connects at all to the printer -- and it sounds like it does -- that the basic
printing would be fine.  Vista is more likely to cause difficulties in the GUI.
Any experiences you have would be worth noting.

Roy

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Sergei Antonov" 
<antonovsergei@...> wrote:
>
> After a bit more directed testing I found that printing problem 
> described below exists for calibration mode only and probably is not 
> caused by Vista. I was able to print image in regular mode. 
> 
> GUI does produce AV when program is getting closed, and this is only 
> under Vista. I did not try previous version of QTR. 
> 
> What could I do to help fixing this?
> 
> Thanks,
> Sergei
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Sergei Antonov" 
> <antonovsergei@> wrote:
> >
> > Roy, I installed this version to Vista OS RTM and it doesn't work 
> > properly.
> > I tried version 2.5.0.3 with Epson r200 and 2200 in calibration 
> mode. 
> > On both printers paper feed works a bit strange, it jerks the paper 
> > back and forth. When paper is finally set in place, printer thinks 
> a 
> > moment then push it away. Nothing is printed on paper.
> > When I close the window, I am getting Access Violation error (read 
> on 
> > address 0000).
> > 
> > Did you try it on Vista?
> > 
> > Thanks,
> > Sergei
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Roy 
> Harrington" 
> > <roy@> wrote:
> > >
> > > 
> > > 
> > > Check out the new release.
> > > 
> > > See:  http://www.quadtonerip.com
> > > 
> > > Roy Harrington
> > >
> >
>