Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

Re: printer

2007-04-03 by scottkathe1

I found the MIS-EZN inks ,even with the warm ink in the yellow
position, were a bit on the cool side with my C86 and EEM. That's why
I opted for the warm inkset with my R220-but its way too warm. Maybe
the neutral inks for the R220 and a 'warm' paper will give the look
I'm after.

Scott

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Roger"
<rsmith02@...> wrote:
>
> I find the neutral inks too cool and quite bluish on many papers.  I 
> recommend having one dark and white light ink warm, the other light 
> and dark cool and yellow cool.  
> 
> I have warm in magenta/light magenta, cool ink cyan/light cyan and 
> cool in yellow and find it neutral.  I hope to create some ICC 
> profiles with the driver slider set to -20C +20M, etc for a 
> simplified variable tone inkset.  
> 
> I find that just the driver sliders don't give me consistency with 
> the Roark ICC workflow.
> 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "scottkathe1" 
> <scott.kathe@> wrote:
> >
> > Eric (and anyone else),
> > 
> > How do you like the variable tone printing with the R220? I started
> > with the warm tone inkset and my R220 so I could try something
> > different from the neutral inkset that I used on the C86. I find 
> the
> > warm tone inkset too warm for my tastes but not a big deal since 
> I've
> > been printing BO for the most part. Now I have a couple of images 
> that
> > have a lot of detail and the BO prints are too 'grainy'. I'm 
> thinking
> > about buying the all the neutral inks but debating whether or not 
> to
> > set up for variable tone printing. Any thoughts?
> > 
> > Scott 
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Eric Miner"
> > <eminer1254@> wrote:
> > >
> > > I've been using the R220 with the MIS UTR2 inkset for a few 
> months. The 
> > > combo creates very nice prints. I recently set the R220 up for 
> variable 
> > > tone BO printing by adding the UTR2 warm inks. For the money the 
> R200 
> > > with the MIS inkset is unbeatable.
> > > 
> > > BTW - I found my R220 at a local camera shop for $60 (US). Right 
> now 
> > > there are four or five available on ebay at good prices.
> > > 
> > > Eric
> > >
> >
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.