Digital BW, The Print

The chips MIS gets have a rather high defect rate.  I recommend getting an
extra set.  Also, always save the Epson chips.  They reset fine.

 

Sometimes the chip problem is that the cart itself is a hair too short.  If
something is put behind the chip so that it extends a bit further out it
might make contact and work fine.  The putty MIS ships with the chips to
hold them can be used to do this.

 

Paul

www.PaulRoark.com <http://www.paulroark.com/>  

 

 

  _____  

From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of Phil M
Sent: Sunday, May 27, 2007 5:50 AM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: Re: [Digital BW] installationproblem new MIS Cartridges set

 

Remco,

I have just hopefully gotten through a similar problem refilling MIS 2200 
cartridges with all kinds of resetting problems. I seem to have solved most 
errors by replacing several of the MIS chips with Epson chips off empties. 
(And resetting) Other troubles seem to come from a seemingly intermittant 
SK-168 resetter, but currently up and seemingly running properly. :-) Good 
luck.

Phil Morse

----- Original Message ----- 
From: "remkopieter" <r.p.de.graaff@ <mailto:r.p.de.graaff%40hccnet.nl>
hccnet.nl>
To: <DigitalBlackandWhit
<mailto:DigitalBlackandWhiteThePrint%40yahoogroups.com>
eThePrint@yahoogroups.com>
Sent: Sunday, May 27, 2007 4:11 AM
Subject: [Digital BW] installationproblem new MIS Cartridges set

after installing my new UT7 set of cartridges in the 2100/2200 the
indicators of the Black and Light Black ink keep flashing. After
replacing the black cartridge with the original Epson cartridges every
thing is OK.
I tried everything such as resetting the chip pulling out extra ink
without result. Up to now I did not receive an answer from MIS for this
problem,

Is there anybody who experienced the same problem or can help me out?

If I cannot solve the problem I will have a new set of inkbottles for
sale because I will give up

remko






[Non-text portions of this message have been removed]