Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Thread

Re: [Digital BW] installationproblem new MIS Cartridges set

Re: [Digital BW] installationproblem new MIS Cartridges set

2007-05-27 by Brian Ellis

I experienced that problem several times. MIS will tell you to try a couple 
different things the details of which I've now forgotten. It didn't seem to 
me that I should have to go through the things they wanted me to do in order 
to make their product work properly. They were nice about it and replaced 
the cartridges.

That was one of the various different quality control problems I experienced 
in my six or seven years of using MIS inks in an 1160, a 1280, and a 2200. 
The people at MIS were always very nice, always willing to replace defective 
cartridges with no questions asked, but eventually I just got tired of the 
problems and switched to Epson UC inks and QTR.

. ----- Original Message ----- 
Show quoted textHide quoted text
From: "remkopieter" <r.p.de.graaff@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Sunday, May 27, 2007 4:11 AM
Subject: [Digital BW] installationproblem new MIS Cartridges set


after installing my new UT7 set of cartridges in the 2100/2200 the
indicators of the Black and Light Black ink keep flashing. After
replacing the black cartridge with the original Epson cartridges every
thing is OK.
I tried everything such as resetting the chip pulling out extra ink
without result. Up to now I did not receive an answer from MIS for this
problem,

Is there anybody who experienced the same problem or can help me out?

If I cannot solve the problem I will have a new set of inkbottles for
sale because I will give up


remko



Please visit the Group Homepage to check the Files, and other resources as
they are often being updated.

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.

Please follow these basic guidelines:
- As threads develop, trim off excess portions of earlier messages to keep
them short.
- Good manners are required at all time. No personal attacks or flames.
Hostile, aggressive or argumentative users may be removed from the
membership without notice.
- Keep your posts and threads related to the group topic of digital B&W
printing. Users who persistently make off-topic posts may be removed from
the membership.
- By posting on this forum you agree to abide by the group rules and
guidelines, and to abide by the actions and decisions of the group Owner and
Moderators. See "Group Topic, Rules and Guidelines" in the Files section:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/

BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY
DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  "OWNER" AND
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY
TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR
ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY
THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER
MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.

Yahoo! Groups Links

Re: [Digital BW] installationproblem new MIS Cartridges set

2007-05-27 by Phil M

Remco,

I have just hopefully gotten through a similar problem refilling MIS 2200 
cartridges with all kinds of resetting problems.  I seem to have solved most 
errors by replacing several of the MIS chips with Epson chips off empties. 
(And resetting)  Other troubles seem to come from a seemingly intermittant 
SK-168 resetter, but currently up and seemingly running properly.  :-)  Good 
luck.

Phil Morse
Show quoted textHide quoted text
----- Original Message ----- 
From: "remkopieter" <r.p.de.graaff@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Sunday, May 27, 2007 4:11 AM
Subject: [Digital BW] installationproblem new MIS Cartridges set


after installing my new UT7 set of cartridges in the 2100/2200 the
indicators of the Black and Light Black ink keep flashing. After
replacing the black cartridge with the original Epson cartridges every
thing is OK.
I tried everything such as resetting the chip pulling out extra ink
without result. Up to now I did not receive an answer from MIS for this
problem,

Is there anybody who experienced the same problem or can help me out?

If I cannot solve the problem I will have a new set of inkbottles for
sale because I will give up


remko



Please visit the Group Homepage to check the Files, and other resources as 
they are often being updated.

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to 
unsubscribe, please edit your Membership preferences by visiting this same 
page.

Please follow these basic guidelines:
- As threads develop, trim off excess portions of earlier messages to keep 
them short.
- Good manners are required at all time. No personal attacks or flames. 
Hostile, aggressive or argumentative users may be removed from the 
membership without notice.
- Keep your posts and threads related to the group topic of digital B&W 
printing. Users who persistently make off-topic posts may be removed from 
the membership.
- By posting on this forum you agree to abide by the group rules and 
guidelines, and to abide by the actions and decisions of the group Owner and 
Moderators. See "Group Topic, Rules and Guidelines" in the Files section:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/

BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT 
YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND 
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU 
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY 
DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, 
GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  "OWNER" AND 
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY 
TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR 
ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY 
THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER 
MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.

Yahoo! Groups Links

RE: [Digital BW] installationproblem new MIS Cartridges set

2007-05-27 by Paul Roark

The chips MIS gets have a rather high defect rate.  I recommend getting an
extra set.  Also, always save the Epson chips.  They reset fine.

 

Sometimes the chip problem is that the cart itself is a hair too short.  If
something is put behind the chip so that it extends a bit further out it
might make contact and work fine.  The putty MIS ships with the chips to
hold them can be used to do this.

 

Paul

www.PaulRoark.com <http://www.paulroark.com/>  

 

 

  _____  
Show quoted textHide quoted text
From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of Phil M
Sent: Sunday, May 27, 2007 5:50 AM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: Re: [Digital BW] installationproblem new MIS Cartridges set

 

Remco,

I have just hopefully gotten through a similar problem refilling MIS 2200 
cartridges with all kinds of resetting problems. I seem to have solved most 
errors by replacing several of the MIS chips with Epson chips off empties. 
(And resetting) Other troubles seem to come from a seemingly intermittant 
SK-168 resetter, but currently up and seemingly running properly. :-) Good 
luck.

Phil Morse

----- Original Message ----- 
From: "remkopieter" <r.p.de.graaff@ <mailto:r.p.de.graaff%40hccnet.nl>
hccnet.nl>
To: <DigitalBlackandWhit
<mailto:DigitalBlackandWhiteThePrint%40yahoogroups.com>
eThePrint@yahoogroups.com>
Sent: Sunday, May 27, 2007 4:11 AM
Subject: [Digital BW] installationproblem new MIS Cartridges set

after installing my new UT7 set of cartridges in the 2100/2200 the
indicators of the Black and Light Black ink keep flashing. After
replacing the black cartridge with the original Epson cartridges every
thing is OK.
I tried everything such as resetting the chip pulling out extra ink
without result. Up to now I did not receive an answer from MIS for this
problem,

Is there anybody who experienced the same problem or can help me out?

If I cannot solve the problem I will have a new set of inkbottles for
sale because I will give up

remko






[Non-text portions of this message have been removed]

Re: [Digital BW] installationproblem new MIS Cartridges set

2007-05-27 by wkm@kauaiphotos.biz

You might want to try removing the chips from the Epson carts and put them on the MIS carts. Reset the chips and see if that works.

Best, Walt
Show quoted textHide quoted text
>-----Original Message-----
>From: remkopieter [mailto:r.p.de.graaff@...]
>Sent: Saturday, May 26, 2007 10:11 PM
>To: DigitalBlackandWhiteThePrint@yahoogroups.com
>Subject: [Digital BW] installationproblem new MIS Cartridges set
>
>after installing my new UT7 set of cartridges in the 2100/2200 the 
>indicators of the Black and Light Black ink keep flashing. After 
>replacing the black cartridge with the original Epson cartridges every 
>thing is OK.
>I tried everything such as resetting the chip pulling out extra ink 
>without result. Up to now I did not receive an answer from MIS for this 
>problem,
>
>Is there anybody who experienced the same problem or can help me out?
>
>If I cannot solve the problem I will have a new set of inkbottles for 
>sale because I will give up
>
>
>remko
>
>
>
>Please visit the Group Homepage to check the Files, and other resources as they are often being updated.
>
>http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
>If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page.
>
>Please follow these basic guidelines:
>- As threads develop, trim off excess portions of earlier messages to keep them short.
>- Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice.
>- Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership.
>- By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See “Group Topic, Rules and Guidelines” in the Files section:
>http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
>
>BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE “OWNER” AND “MODERATORS” OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  “OWNER” AND “MODERATORS” OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
> 
>Yahoo! Groups Links
>
>
>
>

Re: installationproblem new MIS Cartridges set

2007-05-27 by remkopieter

Walt and other people who responded on my problem,

many thanks for your tips. this was a 100% hit. I replaced the chip 
with an Epson chip, resetted and everything was OK.




--- In DigitalBlackandWhiteThePrint@yahoogroups.com, wkm@... wrote:
>
> You might want to try removing the chips from the Epson carts and 
put them on the MIS carts. Reset the chips and see if that works.
> 
> Best, Walt
> >-----Original Message-----
> >From: remkopieter [mailto:r.p.de.graaff@...]
> >Sent: Saturday, May 26, 2007 10:11 PM
> >To: DigitalBlackandWhiteThePrint@yahoogroups.com
> >Subject: [Digital BW] installationproblem new MIS Cartridges set
> >
> >after installing my new UT7 set of cartridges in the 2100/2200 the 
> >indicators of the Black and Light Black ink keep flashing. After 
> >replacing the black cartridge with the original Epson cartridges 
every 
> >thing is OK.
> >I tried everything such as resetting the chip pulling out extra 
ink 
> >without result. Up to now I did not receive an answer from MIS for 
this 
> >problem,
> >
> >Is there anybody who experienced the same problem or can help me 
out?
> >
> >If I cannot solve the problem I will have a new set of inkbottles 
for 
> >sale because I will give up
> >
> >
> >remko
> >
> >
> >
> >Please visit the Group Homepage to check the Files, and other 
resources as they are often being updated.
> >
> >http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> >
> >If you wish to receive no emails or just a daily digest, or you 
wish to unsubscribe, please edit your Membership preferences by 
visiting this same page.
> >
> >Please follow these basic guidelines:
> >- As threads develop, trim off excess portions of earlier messages 
to keep them short.
> >- Good manners are required at all time. No personal attacks or 
flames. Hostile, aggressive or argumentative users may be removed 
from the membership without notice.
> >- Keep your posts and threads related to the group topic of 
digital B&W printing. Users who persistently make off-topic posts may 
be removed from the membership.
> >- By posting on this forum you agree to abide by the group rules 
and guidelines, and to abide by the actions and decisions of the 
group Owner and Moderators. See "Group Topic, Rules and Guidelines" 
in the Files section:
> >http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> >
> >BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE 
PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT 
THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP 
SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT 
LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER 
INTANGIBLE LOSSES (EVEN IF THE  "OWNER" AND "MODERATORS" OF DIGITAL 
BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE 
THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR 
ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT 
OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) 
ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
Show quoted textHide quoted text
> > 
> >Yahoo! Groups Links
> >
> >
> >
> >
>

Re: [Digital BW] installationproblem new MIS Cartridges set

2007-05-27 by remkopieter

Paul,  I solved the problem by using an Epson chip from an empty 
cartridges.

I will follow your suggestion and order some extra chips and 
cartridges etc.

thanks for your help


remko


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" 
<paul.roark@...> wrote:
>
> The chips MIS gets have a rather high defect rate.  I recommend 
getting an
> extra set.  Also, always save the Epson chips.  They reset fine.
> 
>  
> 
> Sometimes the chip problem is that the cart itself is a hair too 
short.  If
> something is put behind the chip so that it extends a bit further 
out it
> might make contact and work fine.  The putty MIS ships with the 
chips to
> hold them can be used to do this.
> 
>  
> 
> Paul
> 
> www.PaulRoark.com <http://www.paulroark.com/>  
> 
>  
> 
>  
> 
>   _____  
> 
> From: DigitalBlackandWhiteThePrint@yahoogroups.com
> [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of 
Phil M
> Sent: Sunday, May 27, 2007 5:50 AM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: Re: [Digital BW] installationproblem new MIS Cartridges set
> 
>  
> 
> Remco,
> 
> I have just hopefully gotten through a similar problem refilling 
MIS 2200 
> cartridges with all kinds of resetting problems. I seem to have 
solved most 
> errors by replacing several of the MIS chips with Epson chips off 
empties. 
> (And resetting) Other troubles seem to come from a seemingly 
intermittant 
> SK-168 resetter, but currently up and seemingly running properly. :-
) Good 
> luck.
> 
> Phil Morse
> 
> ----- Original Message ----- 
> From: "remkopieter" <r.p.de.graaff@ <mailto:r.p.de.graaff%
40hccnet.nl>
> hccnet.nl>
> To: <DigitalBlackandWhit
> <mailto:DigitalBlackandWhiteThePrint%40yahoogroups.com>
> eThePrint@yahoogroups.com>
> Sent: Sunday, May 27, 2007 4:11 AM
> Subject: [Digital BW] installationproblem new MIS Cartridges set
> 
> after installing my new UT7 set of cartridges in the 2100/2200 the
> indicators of the Black and Light Black ink keep flashing. After
> replacing the black cartridge with the original Epson cartridges 
every
> thing is OK.
> I tried everything such as resetting the chip pulling out extra ink
> without result. Up to now I did not receive an answer from MIS for 
this
> problem,
> 
> Is there anybody who experienced the same problem or can help me 
out?
> 
> If I cannot solve the problem I will have a new set of inkbottles 
for
Show quoted textHide quoted text
> sale because I will give up
> 
> remko
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.