Digital BW, The Print

Paul,  I solved the problem by using an Epson chip from an empty 
cartridges.

I will follow your suggestion and order some extra chips and 
cartridges etc.

thanks for your help


remko


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" 
<paul.roark@...> wrote:
>
> The chips MIS gets have a rather high defect rate.  I recommend 
getting an
> extra set.  Also, always save the Epson chips.  They reset fine.
> 
>  
> 
> Sometimes the chip problem is that the cart itself is a hair too 
short.  If
> something is put behind the chip so that it extends a bit further 
out it
> might make contact and work fine.  The putty MIS ships with the 
chips to
> hold them can be used to do this.
> 
>  
> 
> Paul
> 
> www.PaulRoark.com <http://www.paulroark.com/>  
> 
>  
> 
>  
> 
>   _____  
> 
> From: DigitalBlackandWhiteThePrint@yahoogroups.com
> [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of 
Phil M
> Sent: Sunday, May 27, 2007 5:50 AM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: Re: [Digital BW] installationproblem new MIS Cartridges set
> 
>  
> 
> Remco,
> 
> I have just hopefully gotten through a similar problem refilling 
MIS 2200 
> cartridges with all kinds of resetting problems. I seem to have 
solved most 
> errors by replacing several of the MIS chips with Epson chips off 
empties. 
> (And resetting) Other troubles seem to come from a seemingly 
intermittant 
> SK-168 resetter, but currently up and seemingly running properly. :-
) Good 
> luck.
> 
> Phil Morse
> 
> ----- Original Message ----- 
> From: "remkopieter" <r.p.de.graaff@ <mailto:r.p.de.graaff%
40hccnet.nl>
> hccnet.nl>
> To: <DigitalBlackandWhit
> <mailto:DigitalBlackandWhiteThePrint%40yahoogroups.com>
> eThePrint@yahoogroups.com>
> Sent: Sunday, May 27, 2007 4:11 AM
> Subject: [Digital BW] installationproblem new MIS Cartridges set
> 
> after installing my new UT7 set of cartridges in the 2100/2200 the
> indicators of the Black and Light Black ink keep flashing. After
> replacing the black cartridge with the original Epson cartridges 
every
> thing is OK.
> I tried everything such as resetting the chip pulling out extra ink
> without result. Up to now I did not receive an answer from MIS for 
this
> problem,
> 
> Is there anybody who experienced the same problem or can help me 
out?
> 
> If I cannot solve the problem I will have a new set of inkbottles 
for
> sale because I will give up
> 
> remko
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>