Digital BW, The Print

THis also happens when using MIS spongeless cartridges in an R1800.
Solution: snip 1/16" off the top of the plastic spring latch. A
scissors will work just fine.

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Lou Meluso"
<lmeluso@...> wrote:
>
> Hello Barbara:
> 
> I experienced this myself just recently. The top of the cart cage just
> would not latch on the R2400 after converting to MIS carts. I applied
> some additional pressure on each cart on the latch side (the nozzle
> side) and then pressed down on the latch cover, at the latch point, with
> some pressure and got it to latch. I agree this was a tight fit. I hope
> after a few refills the carts get "worked in" a bit to make this easier.
> 
> Lou
> 
>  
> 
> Louis Meluso
> 
> Manager, Imaging Services
> 
> The Nelson-Atkins Museum of Art
> 
> 4525 Oak Street
> 
> Kansas City, MO  64111
> 
> 816-751-1233
> 
> lmeluso@...
> 
>  
> 
>  
> 
> 
> 
> [Non-text portions of this message have been removed]
>