Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Brian Ellis <bellis60@...> wrote:
> ... I haven't yet reached the point of being sufficiently 
> aggravated to call Epson but if you (or anyone else here) encounter a 
> similar problem and/or a suggested solution I'd appreciate hearing about it.

I've just been trying some A3 sheets of Innova soft textured natural white (315g)
and about one in five sheets gets me a failure to load.

It's quite a stiff card, so i found that firmly pushing it down into the printer gets
the printer to recognise it and pull it into place.

When i was talking to my paper/ink supplier the other day he said that several
people had feed issues with the rear slot - mostly after using quite a bit of
paper and particularly from ones likely to shed dust.

One person had taken to lightly spraying some diluted PVA onto a sheet of
thick paper, and letting it dry to a slightly tacky finish to pick up dust - not
something I'd be keen to replicate - even if the printer is a demo one ;-)

bye for now

Keith