Digital BW, The Print

Harry;

As Paul indicated, the culprit is usualy an air pocket around the ink 
outlet. If you don't already have one, get a syringe (and some bottom 
fill adaptors), and use it to pull any air out of the outlet area.

Steve Karafyllakis

 --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Harry B 
Houchins" <harrybh@...> wrote:
>
> I just tried using some inks as recommended by Paul Rouke -
> EZW-T0444-Y, K4-T0559-SLC & K4-T0597-SLC. I placed them into the
> printer and ran a noozle check. These three cartridges failed to
> produce a perfect pattern. Not even close...
> I ran a cleaning cycle with no discernable improvement. In fact I
> repeated the cleaning and noozle check three more times with little
> improvement. I replaced the MIS cartridges with Epson's and no 
problem.
> I had this problem with MIS inks on my old R1820.
> A search of the archives revealed no discussions of this proble 
that I
> could find.
> Any suggestions?
> 
> Regards,
> Harry B Houchins
> www.lightspeed-images.com
>