Digital BW, The Print

Scott,

From my experience with the R800, I would guess that the problem you
encountered -- the printer passing the paper through -- is hardware
rather than software related.  I have had it happen with the Epson
driver and with QTR.  I think it is a mechanical problem rather than
software.  It is frustrating, but I find if you just keep at it a
reasonable percentage print.  That does not say much for the
construction of the printer, but it does work.

Steve

--- In DigitalBlackandWhiteThePrint@yahoogroups.com,
"scott_now_coming" <scott_now_coming@...> wrote:
>
> Well, when I printed some 4x5" test prints, there was no problems 
> with loading.
> 
> However, this morning when I loaded an 8.5x11" sheet, the R800 passed 
> the paper through the printer without printing.
> 
> Then, I reloaded the sheet and it started to print. Then the printer 
> stopped printing after about being 3/4 done, and passed the sheet 
> through the printer.
> 
> 
> So, I've un-installed QTR and then re-installed QTR.
> 
> I haven't tried to make a print yet, but I'll let you know later 
> today when I do.
> 
> Quick question: If you lay side_by_side Enhanced Matte and PremierArt 
> 210 Dual Sided Matte, which paper is warmer in tone?
> 
> Thanks,
> Scott
>   
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" 
> <paul.roark@> wrote:
> >
> > Scott,
> > 
> > >Gotta say I love the Arches #140 Bright White HP printed on a 
> > >R800 with Eboni.
> > 
> > So, it must load OK for you. 
> > 
> > 
> > >What paper comes close to giving the same look as this Arches?
> > 
> > Compare MIS Alpha (Innova Soft Texture) and Arches, the last two 
> graphs at
> > http://www.paulroark.com/BW-Info/R1800-No-OBA-Paper.pdf  This paper 
> may be
> > cheaper, but I'm, again, not sure about how well it'll load.
> > 
> > Paul
> > www.PaulRoark.com
> >
>