Digital BW, The Print

Here's an update on the problem I reported...

Jeff Hirsch at Inkjetmall has responded that removing all the  
cartridges and re-installing them may correct the problem of the  
printer not seeing the cartridges. Well, I tried this AM and the  
results? Now the printer doesn't recognize the Yellow and the Light  
Black and the Light Magenta cartridge.
I'm going backwards in a hurry...
I immediately  removed and replaced theY, LK & LM cartridges and two  
were recognized - but not the yellow.
I then removed all cartridges, shut off and restarted the printer and  
re-installed all cartridges. The Yellow cartridge, once again, is not  
recognized.

Regards,
Harry
www.lightspeed-images.com
www.scari.org


After writing the above, on a whim, I tried removing and replacing  
the Y cartridge, yet again, and it was accepted!!! I ran five nozzle  
checks and cleaning cycles till I got an acceptable pattern. So I  
opened PSCS3 and printed a test image on Epson Enhanced Matte...  
and... (drum roll, please...) I got a perfect print! I shut down the  
printer and restarted and it still recognized the yellow cartridge...

HBH