Digital BW, The Print

If I may interject: the early versions of SSC required Win 98, but 
the current one runs just fine on XP-I recently re-set my R1800 that 
way. You can also use the R2400 Adjustment program,which you don't 
even have to install, it doesn't go through the Win registry.

Steve Karafyllakis


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Carl Schofield 
<list@...> wrote:
>
> Thanks for the tip Robert.  I'll see if the 2400 can be revived 
with  
> this technique.
> 
> Carl
> On Dec 1, 2007, at 9:59 PM, robert49brake wrote:
> 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Carl 
Schofield  
> > <list@> wrote:
> >>
> >> Not really sure Clayton.  I got the all lights flashing syndrome 
and
> >> warning that the printer needs to be serviced, but nothing 
specific.
> >
> > Carl, I just had an R220 go through that today.  Fortunately 
I've  
> > been through it before with
> > another R220.  Very possibly could be waste pad registering as  
> > full--both red lights flashing,
> > something on the order of Internal parts worn out--must be 
serviced.
> >
> >  I borrow a Windoze laptop, dowload the Russian utility (SSC) ,  
> > load the printer driver onto
> > the borrowed PC and use the Protection Counter Reset utility in 
SSC  
> > to reset the waste
> > counter.  My experience has been that lots of cleaning cycles 
will  
> > set off the wastepad shut
> > down long before it's necessary.  I looked at the wastepad on 
the  
> > printer that shut down
> > today and I would say it was less than 1/4 full.  The utility  
> > reported 20k whatever cycles out
> > of a maximum of 46k allowed. Borrowing the PC (and even worse,  
> > having to use it, was a
> > pain but it does the trick;)  If you have an intel mac it might 
be  
> > worth a copy of windoze 98
> > just to have the SSC utility around.
> >
>