Digital BW, The Print

Sounds like you are doing what has worked four times for me. Wish I could
help. 

Todd

> Stock Solutions, aka, Inkjetart.com is the co. that I purchased the cis
> from.  It is the same as nomorecarts system.  The tape on the bottom of the
> carts is intact.  I have not touched it.  There are no wholes in the tape.
> I have attempted repeatedly to fill the carts by inserting the syringe into
> the tube for each of the inks.  I have pumped until I can not hear any air
> coming out and then I have pumped some more.  I then use the clamp that is
> provided w/ the system to clamp of the tube.  I then insert the tube into
> the ink, put on the cap per the instructions and then release the clamp.  At
> this point the ink should flow right into the tube.  It does not.  I would
> definitely like to get this system to work.  I would appreciate feedback
> from those who have successfully installed this system. Thanks,  Boris
> 
 
>>> I have repeatedly tried to fill the carts for my 1270.  They will
>>> not fill.  To the best of my knowledge I have followed the directions
>>> on the stock solution website.  I have tried filling different
>>> chambers, all to no avail.  I have been using the clamps that were
>>> sent with the system.  Would appreciate any pertinent feedback.
>>> Thanks, Boris
>> 
>> You are trying to use the vacuum method, using the syringe with the flow
>> regulators (or whatever they are really called) as in the instruction
>> manual? If so, something is off in your technique. Perhaps you have removed
>> tape from some of the holes so that a vacuum within the cart can not be
>> made?
>> 
>> You make mention of stock solutions but provide no link. Please provide
>> more
>> specifics as to the parts you are using and the techniques you are
>> employing
>> and someone may be able to help.
>> 
>> Todd